Model : KM-SSN Pressurized & separated stainless steel solar tank with none copper coil
Tank volume : 200L -500L (50gal-130gal)
Copper coil: None
Solar tank ( pressure solar Split Stainless steel tank with None coil )
Model : KM-SSN
1) Tank volume: 200 L, 300 L, 400 L, 500 L (50gal-130gal)
2) Outer tank: Colored Steel Sheet ,Thickness: 0.5mm ; Optional: Stainless steel
3) Inner tank: Stainless steel SUS 304 - 2B Thickness: 1.5mm /2 mm
4) Insulation: polyurethane foam thickness: 45-50mm
5) Copper coil: thickness: 1mm; diameter: 12mm ; Optional: 14mm ,16mm
6) Tank Include: E-heater ,Mg Anode ,T&P Valve ,relief valve, Drain valve ,Sensor
7) Inlet/Outlet/Drain/Circulating inlet/Circulating outlet: 3/4 inch
8) Working pressure: 0.6 Mpa Test pressure: 0.9Mpa
Model
Tank volume
Inner tank thickness
E-heater
Foam
copper coil
Qty.(Sets)
20"
40HQ
KM-SSN-200
200L/50gal
1.5mm
1.5 kw
45mm
none
27
78
KM-SSN-300
300L/80gal
KM-SSN-400
400L/105gal
2mm
2.5 kw
50mm
21
66
KM-SSN-500
500L/130gal
63
Open-loop Active solar systems use pumps to circulatehousehold water through the collectors ,This design is efficient and lowers operating costs but is not appropriate if your water is hard or acidicbecause scale and corrosion quickly disable the system.These open-loop systems are popular in nonfreezing climates. They should never be installed in climates that experience freezing temperatures for sustained periods. You can install them in mild but occasionally freezing climates,But you must consider freeze protection.