Flat plate collector solar heater for you

Solar system are installed on the roof, typically facing South. when heated by the sun, rises up to circulate through the water tank, heating the water.
The system can act as a stand alone water heater, as the tank contains its own heating element, or the system can act as a non-electric pre-heater to a standard electric or gas water heater in the home. Savings in water heating cost exceed 90 percent in summer, saving over 20 percent of the typical electric bill. This system does not freeze, and corrosive water will not damage the collector copper tubes.

Advantage of flat plate collector solar heater :

1) Safe and steady
Solar collector uses all cooper fluid tube; System operating is steady; components are not easy to be damaged;

2.Pressurized operating
Working pressure is 0.6Mpa; designed pressure is 1.2Mpa; the hot water is forced to stream out from the top; it is convenient to use.

3.High heat efficiency
Absorbing coating of the collector is blue sputtering; absorbing rate is 93-97%, and emission rate is 2%-6%; heat efficiency is high

4.Good temperature preservation    
Thickness illustration layer is 50mm; constant temperature high pressure quantitative foam; less than 5 Celsius Degree per 24 H.
5. Several models fulfill different user need
According to customers’ requirement, we put our several modes with different specifications to suit flat, villa, hotel and factories. , etc

6.Easy installation
In order to suit different kinds of building construction, we search and produce several kinds of bracket construction, which are convenient to install and handsome appearance. 

7.Resist freeze
System has freeze resisting function which can be used in high latitude and cold area whether summer and winter.